PeptideWiki

What is a peptide bond? Resonance, cis/trans isomers and how it forms and breaks

Published by the PeptideWiki editorial team.

What is a peptide bond? The amide link between amino acids, with a 1.33 Å C–N bond of partial double-bond character that keeps it planar, mostly trans and slow to hydrolyze.

What is a peptide bond? It is the amide bond that joins the carboxyl carbon of one amino acid to the amino nitrogen of the next. It forms by condensation, releasing one water molecule per bond. Its defining feature is partial double-bond character, which makes it rigid, planar and very slow to break without a catalyst.

What is a peptide bond, chemically?

In the simplest description, the α-amino group of one amino acid attacks the α-carboxyl group of another. An amide bond forms and water is released. A chain of n residues therefore contains n−1 peptide bonds. For background on how chains are named and counted, see what is a peptide and the amino acid reference.

The reaction is uphill in water. The American Peptide Society knowledge base gives a standard free energy change of about +3.5 kcal/mol per bond at physiological pH and temperature. The equilibrium therefore favors hydrolysis, not synthesis. Simply mixing amino acids in water does not build peptides.

Cells solve this with activated substrates. Amino acids arrive at the ribosome as aminoacyl-tRNAs, linked through an ester bond worth roughly −7 kcal/mol. Counting tRNA charging and elongation factors, the full cost is about four high-energy phosphate bonds per residue.

Resonance: why the bond is planar

The nitrogen lone pair is delocalized into the neighboring carbonyl. The bond is best described as a hybrid of two resonance forms. Calculations and measurements converge on a C–N bond order of about 1.4, between a single and a double bond.

That intermediate character shows up directly in bond lengths measured by X-ray crystallography:

BondTypical length (Å)
C–N single bond1.47
Peptide C–N bond1.33
C=N double bond1.27
Ketone C=O1.21
Peptide C=O1.24

Rotating about the C–N bond would break the partial π overlap. The barrier is roughly 15 to 20 kcal/mol. As a result, six atoms lie in one plane: the two flanking α-carbons, the carbonyl carbon and oxygen, and the amide nitrogen and hydrogen. In well-determined crystal structures, deviations from this plane are usually under five degrees.

Planarity leaves only two backbone bonds free to rotate per residue: N–Cα (φ) and Cα–C (ψ). This restriction is why peptides form regular secondary structures. The bond also carries a dipole of about 3.7 debye. Its carbonyl oxygen is a good hydrogen-bond acceptor and its N–H a good donor.

Delocalization also makes the amide nitrogen a very weak base. Its conjugate acid has a pKa near −1, versus about 10 to 11 for a simple amine. This matters in synthesis: coupling targets the free α-amine, not the amide nitrogens already in the chain.

Cis and trans peptide bonds

Because rotation is restricted, each peptide bond is locked in one of two arrangements. In the trans form the flanking α-carbons sit on opposite sides (ω ≈ 180°). In the cis form they sit on the same side (ω ≈ 0°).

  • Non-proline bonds: trans is favored by about 2 to 3 kcal/mol, a ratio near 1000:1. Surveys of crystal structures find cis non-proline bonds at under 0.05% of positions.
  • Bonds before proline (Xaa–Pro): the gap shrinks to about 0.5 to 1.0 kcal/mol. Roughly 5 to 30% of these bonds are cis in unfolded peptides, depending on the preceding residue.
  • Folded proteins: about 5 to 6% of proline residues adopt cis in the native structure.

A 1993 NMR study by Raines and colleagues measured a capped model, Ac-Gly-Pro-OMe. In aqueous buffer at 25 °C, the trans preference was −1.34 kcal/mol. It came almost entirely from enthalpy (ΔH° = −1.27 kcal/mol), with similar values in toluene.

Spontaneous cis–trans switching takes seconds to minutes. That is slow enough to limit the rate of protein folding. Enzymes called peptidyl-prolyl isomerases speed it up. The two isomers give distinct NMR signals, which is how their ratio is measured.

How peptide bonds are formed in solid-phase synthesis

A free carboxylic acid reacts only sluggishly with an amine under mild conditions. Chemical synthesis therefore activates the carboxyl first. Coupling reagents such as HATU, HBTU and PyBOP convert it in situ into an active ester, which the amine attacks readily.

In Fmoc solid-phase peptide synthesis, the C-terminal residue is anchored to resin beads. Each cycle removes the Fmoc group, then couples the next activated Fmoc-amino acid. Trifluoroacetic acid finally cleaves the chain and side-chain protecting groups. A 2025 review in Angewandte Chemie calls this the standard method for linear peptides under about 40 residues.

The same review describes a recurring failure mode. Some growing chains aggregate on the resin by forming β-sheets through backbone hydrogen bonds. The N-terminus becomes hindered, a coupling stays incomplete, and a deletion sequence results. These impurities can be hard to separate by chromatography. That is one reason the HPLC purity figure on a COA deserves a close read. See also how to read a COA.

Hydrolysis: favorable but extremely slow

Since formation is uphill, breaking a peptide bond with water is downhill. Yet without a catalyst it is very slow. Radzicka and Wolfenden (1996) followed glycine model peptides near 150 °C and extrapolated. They estimated a half-time of about 400 years at 25 °C, falling to about 5.5 weeks at 100 °C.

The mechanism runs through a tetrahedral intermediate at the carbonyl carbon. Acid and base both accelerate it. Sequence context also matters. Asp–Pro bonds are unusually labile in acid, and Asn–Gly sites can deamidate and then cleave.

Proteases accelerate hydrolysis by factors of up to 1017. They fall into four classes: serine, cysteine, aspartic and metallo. Because hydrolysis is always thermodynamically favored, the stability of a peptide in solution is a kinetic property. It depends on temperature, pH, sequence and the presence of proteases, which is the background to the peptide storage and stability guide.

Sources

  1. American Peptide Society Knowledge Base: Formation of the Peptide Bond: Condensation and Thermodynamics
  2. American Peptide Society Knowledge Base: Resonance and Planarity: Why the Peptide Bond Is Not a Simple Amide
  3. American Peptide Society Knowledge Base: Cis and Trans Isomerism: Energetics and Biological Consequences
  4. American Peptide Society Knowledge Base: Hydrolysis: Chemical and Enzymatic Cleavage of the Peptide Bond
  5. Tetrahedron Letters: Thermodynamic Origin of Prolyl Peptide Bond Isomers (Eberhardt, Loh, Raines; May 1993)
  6. BioNumbers (Harvard): Halftime of spontaneous peptide bond hydrolysis at 25 °C, from Radzicka & Wolfenden, J. Am. Chem. Soc. (1996)
  7. Angewandte Chemie International Edition: Backbone Protecting Groups for Enhanced Peptide and Protein Synthesis (July 2025)

Educational content only, not medical advice. Compounds discussed as research materials are for laboratory research use only and are not for human or veterinary use.

More from the blog